TANG SDS PLUS 1-3/8 Inch x 13-3/4 Inch Roatry Hammer Drill Bit for Installation Outdoor Fence Panels Safety Pool Fence Kit
$30.99
In stock
SKU
SSDBIT35MM_SSD
- Brand
- TANG
- Package Quantity
- 1
- Make Type
- Standard
- Handling Time
- 2 Day(s)
- Size
- 1-3/8 x 13-3/4 Inch SDS Plus Drill Bit
- 1-3/8’’ inch SDS plus hammer drill bit for drilling holes in concrete
- Compatible with most SDS Plus-sized rotary hammer drills
- Carbide drill bits for fast cutting and long-lasting durability
- Flute design for faster dust removal from the holes
- High-impact impact, suitable for masonry applications such as brick, stone, concrete, and block. Or for installation of outdoor fence panels
Details
Details
Hardware Kit
|
Pool Fence
|
Sun shade sail
|
Roller shade
|
Outdoor Fence Screen
|
|
|---|---|---|---|---|---|
|
|
|
|
|
|
|
| Customer Reviews |
295
|
8
|
—
|
944
|
10
|
| Price | $24.99 | $266.99 | — no data | $116.99 | $120.99 |
| Easy installation | Yes | Yes | Yes | Yes | Yes |
| UV block | Yes | Yes | Yes | Yes | Yes |
More Information
More Information
TANG 1-3/8 inch x 13-3/4 Inch SDS plus hammer drill bit for drilling holes in concrete
| Package Quantity | 1 |
|---|---|
| Brand | TANG |
Reviews 11
Reviews 11
Customer photos and videos
See all photos
Top reviews
-
★★★★★★★★★★ Worked greatOnly had to use it for 1 hole but turned a 30+ minute job into 5 minutes. Worked perfect.
-
★★★★★★★★★★ Works wellDrilled through cinder block and poured concrete with no issues. It took awhile but it's also a big bit. I only drilled 1 hole so I can't speak much to the durability. After removing the dust it didn't seem to be worn down that much so I think it would be good for several holes.
-
★★★★★★★★★★ Drilled through 13" solid concrete without issue...Drilled through 13" solid concrete without issue...
-
★★★★★★★★★★ Drills concerete block well.Good value.
-
★★★★★★★★★★ Good bitMy bulldog sds has no problem with this bitSeems well made
-
★★★★★★★★★★ great pricegreat price for the largest size bit that can be used with the smaller shank
-
★★★★★★★★★★ Did the job with easeGreat bit. I used it to drill two holes through red brick to install conduit and it performed amazingly well. The bit was well made and looked exactly like in the picture. It still looked like new after two holes.
-
★★★★★★★★★★ WorkedWow, this was a real roll of the dice. It costs a fraction of what a brand-name SDS bit costs. Brand-name makers don't even make bits this large in diameter for SDS Plus, you need to step up to Hilti spline or SDS Max over 1-1/4". They spelled rotary "roatry" in the item description, FFS. There is no way this could work, right? But I needed to make just two holes, and I had a nice quality bit to pilot them, so I figured I'd roll the dice.The fateful day came and I tore open the box. Oh, boy– it does not look promising. It looks like the carbide is hand-welded in to this thing. Did I do it again, but a product on Amazon that was too good to be true? Ah, I have been here before. My hopes were very low.BUT– it worked. Engagement in the SDS Plus chuck was solid. It punched two holes through 10" of rocky concrete. I piloted it with a 5/8" bit and took it slow. It emerged looking a little roughed up but honestly, not so bad as I expected.So yeah, this thing defied the "you get what you pay for" maxim for me. Five stars all the way. I wish you the same good fortune, dear fellow "roatry" hammer operator.
-
★★★★★★★★★★ Great but for priceGreat price will order again
-
★★★★★★★★★★ Double check the correct mounting shaft for your drillGood tool for the price
Write Your Own Review